Windows (Set of Two)
Windows (Set of Two)
Instructions to Replace Window
Use a ½" square wooden dowel that is not flimsy. The square shape will keep the window stable when applying the silicone.
Use a ½" square wooden dowel that is not flimsy. The square shape will keep the window stable when applying the silicone.
Link to purchase dowel.
Place a small foam piece with adhesive back (the size of the inside of the window) on the end of the square dowel to help keep the window in place.
Link to purchase foam sheet:
Place window on dowel
Make sure area is clean and dry on the inside of tube around the window.
Add adhesive around the edge of the window (outlined in red). Make sure to form a complete circle.
After applying, immediately wipe off the epoxy on the outside of the tube.
Link to Loctite HY 4070 which we recommend:
Re-insert window in opening and then clamp. Remove any adhesive that seeps through to the outside of the tube along the window edge.
Let the adhesive cure for 24 hours until fully cured.
Link to purchase spring clamp.